Netgear WG311v3 WLAN PCI Card with Debian Linux Testing
This is a discussion about Netgear WG311v3 WLAN PCI Card with Debian Linux Testing in the Linux Hardware category; Hello, My System A7N8X-E Deluxe, Netgear WG311v3, Debian Testing. i have tested so many drivers. tested with madwifi, prism54>, so many drivers i tested. . . ndiswrapper and marvell cb-55 drivers: it faild.
Hello,
My System
A7N8X-E Deluxe, Netgear WG311v3, Debian Testing.
i have tested so many drivers.
tested with madwifi, prism54>, so many drivers i tested ...
ndiswrapper and marvell cb-55 drivers:
it faild. i get 'driver present' but no 'hardware present' ....
output of lspci:
Code:
output of /var/log/messages:
Code:
tryed some others yesterday:
Code:
Code:
Code:
please, let me know if you have running this card, and how you did it ...
thx
Namandar
My System
A7N8X-E Deluxe, Netgear WG311v3, Debian Testing.
i have tested so many drivers.
tested with madwifi, prism54>, so many drivers i tested ...
ndiswrapper and marvell cb-55 drivers:
it faild. i get 'driver present' but no 'hardware present' ....
output of lspci:
Code:
11ab:1faa (rev 03) --0000:01:07.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless (rev 03)
output of /var/log/messages:
Code:
Sep 25 12:42:39 fr34k kernel: ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)Sep 25 12:42:39 fr34k kernel: wlan: 0.8.6.0 (EXPERIMENTAL)Sep 25 12:42:39 fr34k kernel: ath_rate_sample: 1.2Sep 25 12:42:39 fr34k kernel: ath_pci: 0.9.6.0 (EXPERIMENTAL)Sep 25 12:47:46 fr34k kernel: ath_pci: driver unloadedSep 25 12:47:57 fr34k kernel: ath_rate_sample: unloadedSep 25 12:48:04 fr34k kernel: wlan: driver unloadedSep 25 12:48:12 fr34k kernel: ath_hal: driver unloadedSep 25 12:52:00 fr34k kernel: ndiswrapper version 1.3rc1 loaded (preempt=no,smp=no)
tryed some others yesterday:
Code:
Sep 24 17:05:34 fr34k kernel: ndiswrapper version 1.3rc1 loaded (preempt=no,smp=no)Sep 24 17:05:34 fr34k kernel: ndiswrapper: driver mrv8000c (Marvell,09/17/2004,3.1.0.19) loadedSep 24 17:05:34 fr34k kernel: Trying to free nonexistent resource <ec000000-ec00ffff>Sep 24 17:05:34 fr34k kernel: Trying to free nonexistent resource <ec010000-ec01ffff>---
Code:
Sep 24 17:05:34 fr34k kernel: ACPI: PCI interrupt for device 0000:01:07.0 disabledSep 24 17:18:42 fr34k kernel: ndiswrapper version 1.3rc1 loaded (preempt=no,smp=no)Sep 24 17:18:42 fr34k kernel: ndiswrapper: driver wg311v3 (NETGEAR,02/22/2005,3.1.1.7) loadedSep 24 17:18:42 fr34k kernel: Trying to free nonexistent resource <ec000000-ec00ffff>Sep 24 17:18:42 fr34k kernel: Trying to free nonexistent resource <ec010000-ec01ffff>Sep 24 17:18:42 fr34k kernel: ACPI: PCI interrupt for device 0000:01:07.0 disabled---
Code:
Sep 25 12:42:39 fr34k kernel: ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)Sep 25 12:42:39 fr34k kernel: wlan: 0.8.6.0 (EXPERIMENTAL)Sep 25 12:42:39 fr34k kernel: ath_rate_sample: 1.2Sep 25 12:42:39 fr34k kernel: ath_pci: 0.9.6.0 (EXPERIMENTAL)
please, let me know if you have running this card, and how you did it ...
thx
Namandar
Participate in our website and join the conversation
This subject has been archived. New comments and votes cannot be submitted.
Sep 25
Aug 10
0
3 minutes
Responses to this topic
I am using Fedora 3 with a freshly built kernel version 2.6.13
I am using my wg311 v3 wireless card to post this message
This card works with ndiswrapper version 1.5 and 1.7. These are the versions that I have tested. I used the WG311v3.INF file that came with my Netgear card on the cdrom. However, you need to use the WG311v3XP.sys and put only this sys in the directory with inf file before running the following command.
ndiswrapper -i WG311v3.INF
ndiswrapper -l
will return the message
wg311v3 driver present, hardware present
after that you need to know how to use iwconfig and the other wireless tools.
Have fun with your new netgear wireless card.
I am using my wg311 v3 wireless card to post this message
This card works with ndiswrapper version 1.5 and 1.7. These are the versions that I have tested. I used the WG311v3.INF file that came with my Netgear card on the cdrom. However, you need to use the WG311v3XP.sys and put only this sys in the directory with inf file before running the following command.
ndiswrapper -i WG311v3.INF
ndiswrapper -l
will return the message
wg311v3 driver present, hardware present
after that you need to know how to use iwconfig and the other wireless tools.
Have fun with your new netgear wireless card.
Hi guys. Check out my mini wiki on how to install the WG311v3 Driver on Debian, i hope it can be helpful. And feel free to contribute to make it better!
WG311v3 WIKI
WG311v3 WIKI
