Tried to Install FC4
This is a discussion about Tried to Install FC4 in the Linux Hardware category; I recently tried (several times) to install Fedora Core 4 on my machine. I downloaded the fc4-i386-disc1-4. iso. I used K3b to burn them, I did select New data Project>tools>CD>Burn iso Image.
I recently tried (several times) to install Fedora Core 4 on my machine. I downloaded the fc4-i386-disc1-4.iso. I used K3b to burn them, I did select "New data Project">tools>CD>Burn iso Image. I burned at 8x speed. Every time I tried to insall (I also tried the DVD image with the same results) Fc4 would come to the first main page, I would select "enter" to install in graphical mode (I also tried text, to no avail), FC4 would begin to load the kernel, and then I would get this:
[<c01202eb7>] panic+0x13b/0x1b0
[<c0416b4d7>] mount_block_root+0x39/0x50
[<c0416cc9>] mount_root+0x39/)x50
[<c01002a0>] init+0x0/0xf0
[<c0416d1e>] prepare_namespace+0x3e/0x120
[<c0100357>] initx0xb7/0xf0
[<c01012b1>] kernel_thread_helper+0x5/0x14
[<c014d737>] softlockup_tick+0x87/0x160
[<c0108a93>] timer_interupt+0x63/0x170
[<c014d9b3>] handle_IRQ+0xbc/0x2e0
[<c014da9c>] __do_IRQ+0xbc/0x2e0
[<c0105a81>] do_IRQ+0x51/0x90
=========================
[<c0103c4a>] common_interupt+0x1a/0x20
[<c012007b>] __set_personality+0x19b/0x220
[<c0112449>] delay_pmtmr+0x9/0x20
[<c0208c89>] __delay+0x9/0x10
[<c01202eb>] panic+0x13b/0x1b0
[<c0416b4d>] mount_block_root+0x8d/0xf0
[<c0416cc9>] mount_root+0x39/0x50
[<c01002a0>] init+0x0/0xf0
[<c0416d1e>] prepare_namespace+0x3e/0x120
[<c0100357>] init+0xb7/0xf0
[<c01012b1>] kernel_thread_helper+0x5/0x14
Can someone tell me what the problem is? I also tried re-downloading fom a different mirror. Did I get the wrong download?
Any thoughts?
Thanks
Justbill
Compaq Presario SR1426NX
2.93GHz Pentium 4
512MB PC2-3200 DDR2 SDRAM
160GB 7200RPM Serial ATA hard drive
[<c01202eb7>] panic+0x13b/0x1b0
[<c0416b4d7>] mount_block_root+0x39/0x50
[<c0416cc9>] mount_root+0x39/)x50
[<c01002a0>] init+0x0/0xf0
[<c0416d1e>] prepare_namespace+0x3e/0x120
[<c0100357>] initx0xb7/0xf0
[<c01012b1>] kernel_thread_helper+0x5/0x14
[<c014d737>] softlockup_tick+0x87/0x160
[<c0108a93>] timer_interupt+0x63/0x170
[<c014d9b3>] handle_IRQ+0xbc/0x2e0
[<c014da9c>] __do_IRQ+0xbc/0x2e0
[<c0105a81>] do_IRQ+0x51/0x90
=========================
[<c0103c4a>] common_interupt+0x1a/0x20
[<c012007b>] __set_personality+0x19b/0x220
[<c0112449>] delay_pmtmr+0x9/0x20
[<c0208c89>] __delay+0x9/0x10
[<c01202eb>] panic+0x13b/0x1b0
[<c0416b4d>] mount_block_root+0x8d/0xf0
[<c0416cc9>] mount_root+0x39/0x50
[<c01002a0>] init+0x0/0xf0
[<c0416d1e>] prepare_namespace+0x3e/0x120
[<c0100357>] init+0xb7/0xf0
[<c01012b1>] kernel_thread_helper+0x5/0x14
Can someone tell me what the problem is? I also tried re-downloading fom a different mirror. Did I get the wrong download?
Any thoughts?
Thanks
Justbill
Compaq Presario SR1426NX
2.93GHz Pentium 4
512MB PC2-3200 DDR2 SDRAM
160GB 7200RPM Serial ATA hard drive
Participate in our website and join the conversation
This subject has been archived. New comments and votes cannot be submitted.
Jun 20
Jan 4
0
3 minutes
Responses to this topic
Did you check the md5 checksum? I'm still downloading FC4 now so I can't try installing yet.
If the md5 checksum(s) is/are correct then try:
When you are at the FC boot: prompt, press F2 - F4 to see addional commands for starting setup.
For example, I had to use:
linux resolution=1024x768 nofb, to get the graphical installer working right.
Try running it with:
linux pci=nosort
<edit>
I have successfully installed FC4 from DVD.
Only problem was with framebuffer for some reason.
</edit>
When you are at the FC boot: prompt, press F2 - F4 to see addional commands for starting setup.
For example, I had to use:
linux resolution=1024x768 nofb, to get the graphical installer working right.
Try running it with:
linux pci=nosort
<edit>
I have successfully installed FC4 from DVD.
Only problem was with framebuffer for some reason.
</edit>
I also tried to install Fedora Core 4 (i386) this weekend but had issues as well:
Acer Travelmate 210 notebook
Graphical installer freezes immediately with white screen. Text installer thinks that 8GB free space is not enough for a 1,6GB personal desktop installation.
I just tried Wilhelmus' nofb workaround but the graphical installer is still freezing.
MSI Athlon 1500+ PC
Anaconda fails with an error message. I didn’t try the text install yet on this machine.
AOpen EZ18 Barebone
It works perfectly on this machine. Not a single issue.
Fedora Core 3 installs on all 3 machines without any problems.
Acer Travelmate 210 notebook
Graphical installer freezes immediately with white screen. Text installer thinks that 8GB free space is not enough for a 1,6GB personal desktop installation.
I just tried Wilhelmus' nofb workaround but the graphical installer is still freezing.
MSI Athlon 1500+ PC
Anaconda fails with an error message. I didn’t try the text install yet on this machine.
AOpen EZ18 Barebone
It works perfectly on this machine. Not a single issue.
Fedora Core 3 installs on all 3 machines without any problems.
OP
I'm beginning to think this is hopeless!
I tried both suggestions Wilhelmus had, and I still end up at this same screen:
[<c01202eb7>] panic+0x13b/0x1b0
[<c0416b4d7>] mount_block_root+0x39/0x50
[<c0416cc9>] mount_root+0x39/)x50
[<c01002a0>] init+0x0/0xf0
[<c0416d1e>] prepare_namespace+0x3e/0x120
[<c0100357>] initx0xb7/0xf0
[<c01012b1>] kernel_thread_helper+0x5/0x14
[<c014d737>] softlockup_tick+0x87/0x160
[<c0108a93>] timer_interupt+0x63/0x170
[<c014d9b3>] handle_IRQ+0xbc/0x2e0
[<c014da9c>] __do_IRQ+0xbc/0x2e0
[<c0105a81>] do_IRQ+0x51/0x90
=========================
[<c0103c4a>] common_interupt+0x1a/0x20
[<c012007b>] __set_personality+0x19b/0x220
[<c0112449>] delay_pmtmr+0x9/0x20
[<c0208c89>] __delay+0x9/0x10
[<c01202eb>] panic+0x13b/0x1b0
[<c0416b4d>] mount_block_root+0x8d/0xf0
[<c0416cc9>] mount_root+0x39/0x50
[<c01002a0>] init+0x0/0xf0
[<c0416d1e>] prepare_namespace+0x3e/0x120
[<c0100357>] init+0xb7/0xf0
[<c01012b1>] kernel_thread_helper+0x5/0x14
Justbill
I tried both suggestions Wilhelmus had, and I still end up at this same screen:
[<c01202eb7>] panic+0x13b/0x1b0
[<c0416b4d7>] mount_block_root+0x39/0x50
[<c0416cc9>] mount_root+0x39/)x50
[<c01002a0>] init+0x0/0xf0
[<c0416d1e>] prepare_namespace+0x3e/0x120
[<c0100357>] initx0xb7/0xf0
[<c01012b1>] kernel_thread_helper+0x5/0x14
[<c014d737>] softlockup_tick+0x87/0x160
[<c0108a93>] timer_interupt+0x63/0x170
[<c014d9b3>] handle_IRQ+0xbc/0x2e0
[<c014da9c>] __do_IRQ+0xbc/0x2e0
[<c0105a81>] do_IRQ+0x51/0x90
=========================
[<c0103c4a>] common_interupt+0x1a/0x20
[<c012007b>] __set_personality+0x19b/0x220
[<c0112449>] delay_pmtmr+0x9/0x20
[<c0208c89>] __delay+0x9/0x10
[<c01202eb>] panic+0x13b/0x1b0
[<c0416b4d>] mount_block_root+0x8d/0xf0
[<c0416cc9>] mount_root+0x39/0x50
[<c01002a0>] init+0x0/0xf0
[<c0416d1e>] prepare_namespace+0x3e/0x120
[<c0100357>] init+0xb7/0xf0
[<c01012b1>] kernel_thread_helper+0x5/0x14
Justbill
OP
IT WORKED!!!!!
Thank you Wilhelmus!
I typed:
linux resolution=1024x768 nofb
at the main boot prompt, and here we are, FC4 is up and running on this machine!
Thanks Again
Justbill
Thank you Wilhelmus!
I typed:
linux resolution=1024x768 nofb
at the main boot prompt, and here we are, FC4 is up and running on this machine!
Thanks Again
Justbill
No problem
Hi.
I have the same problem as Justbill.
I tried both remedies that Wilhelmus suggested with the same panic error message.
I installed FC3 on the same machine without any hickups.
Please help
I have the same problem as Justbill.
I tried both remedies that Wilhelmus suggested with the same panic error message.
I installed FC3 on the same machine without any hickups.
Please help
