The following security updates has been released for openSUSE:
openSUSE-SU-2018:2598-1: important: Security update for spice
openSUSE-SU-2018:2599-1: moderate: Security update for postgresql10
openSUSE-SU-2018:2600-1: important: Security update for ImageMagick
openSUSE-SU-2018:2601-1: important: Security update for spice-gtk
openSUSE-SU-2018:2602-1: important: Security update for spice
openSUSE-SU-2018:2598-1: important: Security update for spice
openSUSE-SU-2018:2599-1: moderate: Security update for postgresql10
openSUSE-SU-2018:2600-1: important: Security update for ImageMagick
openSUSE-SU-2018:2601-1: important: Security update for spice-gtk
openSUSE-SU-2018:2602-1: important: Security update for spice
openSUSE-SU-2018:2598-1: important: Security update for spice
openSUSE Security Update: Security update for spice
______________________________________________________________________________
Announcement ID: openSUSE-SU-2018:2598-1
Rating: important
References: #1101295 #1104448
Cross-References: CVE-2018-10873 CVE-2018-10893
Affected Products:
openSUSE Leap 15.0
______________________________________________________________________________
An update that fixes two vulnerabilities is now available.
Description:
This update for spice fixes the following issues:
Security issues fixed:
- CVE-2018-10873: Fix potential heap corruption when demarshalling
(bsc#1104448)
- CVE-2018-10893: Avoid buffer overflow on image lz checks (bsc#1101295)
This update was imported from the SUSE:SLE-15:Update update project.
Patch Instructions:
To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or "zypper patch".
Alternatively you can run the command listed for your product:
- openSUSE Leap 15.0:
zypper in -t patch openSUSE-2018-956=1
Package List:
- openSUSE Leap 15.0 (i586 x86_64):
libspice-server-devel-0.14.0-lp150.3.3.1
libspice-server1-0.14.0-lp150.3.3.1
libspice-server1-debuginfo-0.14.0-lp150.3.3.1
spice-debugsource-0.14.0-lp150.3.3.1
References:
https://www.suse.com/security/cve/CVE-2018-10873.html
https://www.suse.com/security/cve/CVE-2018-10893.html
https://bugzilla.suse.com/1101295
https://bugzilla.suse.com/1104448
--
openSUSE-SU-2018:2599-1: moderate: Security update for postgresql10
openSUSE Security Update: Security update for postgresql10
______________________________________________________________________________
Announcement ID: openSUSE-SU-2018:2599-1
Rating: moderate
References: #1091610 #1104199 #1104202
Cross-References: CVE-2018-10915 CVE-2018-10925 CVE-2018-1115
Affected Products:
openSUSE Leap 15.0
______________________________________________________________________________
An update that fixes three vulnerabilities is now available.
Description:
This update for postgresql10 fixes the following issues:
PostgreSQL 10 was updated to 10.5:
- https://www.postgresql.org/about/news/1851/
- https://www.postgresql.org/docs/current/static/release-10-5.html
A dump/restore is not required for those running 10.X. However, if you
use the adminpack extension, you should update it as per the first
changelog entry below. Also, if the function marking mistakes mentioned in
the second and third changelog entries below affect you, you will want to
take steps to correct your database catalogs.
Security issues fixed:
- CVE-2018-1115: Remove public execute privilege from contrib/adminpack's
pg_logfile_rotate() function pg_logfile_rotate() is a deprecated wrapper
for the core function pg_rotate_logfile(). When that function was
changed to rely on SQL privileges for access control rather than a
hard-coded superuser check, pg_logfile_rotate() should have been updated
as well, but the need for this was missed. Hence, if adminpack is
installed, any user could request a logfile rotation, creating a minor
security issue. After installing this update, administrators should
update adminpack by performing ALTER EXTENSION adminpack UPDATE in each
database in which adminpack is installed (bsc#1091610).
- CVE-2018-10915: libpq failed to properly reset its internal state
between connections. If an affected version of libpq was used with
"host" or "hostaddr" connection parameters from untrusted input,
attackers could have bypassed client-side connection security features,
obtain access to higher privileged connections or potentially cause
other impact SQL injection, by causing the PQescape() functions to
malfunction (bsc#1104199)
- CVE-2018-10925: Add missing authorization check on certain statements
involved with "INSERT ... ON CONFLICT DO UPDATE". An attacker with
"CREATE TABLE" privileges could have exploited this to read arbitrary
bytes server memory. If the attacker also had certain "INSERT" and
limited "UPDATE" privileges to a particular table, they could have
exploited this to update
other columns in the same table (bsc#1104202).
This update was imported from the SUSE:SLE-15:Update update project.
Patch Instructions:
To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or "zypper patch".
Alternatively you can run the command listed for your product:
- openSUSE Leap 15.0:
zypper in -t patch openSUSE-2018-955=1
Package List:
- openSUSE Leap 15.0 (i586 x86_64):
libecpg6-10.5-lp150.3.3.1
libecpg6-debuginfo-10.5-lp150.3.3.1
libpq5-10.5-lp150.3.3.1
libpq5-debuginfo-10.5-lp150.3.3.1
postgresql10-10.5-lp150.3.3.1
postgresql10-contrib-10.5-lp150.3.3.1
postgresql10-contrib-debuginfo-10.5-lp150.3.3.1
postgresql10-debuginfo-10.5-lp150.3.3.1
postgresql10-debugsource-10.5-lp150.3.3.1
postgresql10-devel-10.5-lp150.3.3.1
postgresql10-devel-debuginfo-10.5-lp150.3.3.1
postgresql10-plperl-10.5-lp150.3.3.1
postgresql10-plperl-debuginfo-10.5-lp150.3.3.1
postgresql10-plpython-10.5-lp150.3.3.1
postgresql10-plpython-debuginfo-10.5-lp150.3.3.1
postgresql10-pltcl-10.5-lp150.3.3.1
postgresql10-pltcl-debuginfo-10.5-lp150.3.3.1
postgresql10-server-10.5-lp150.3.3.1
postgresql10-server-debuginfo-10.5-lp150.3.3.1
postgresql10-test-10.5-lp150.3.3.1
- openSUSE Leap 15.0 (x86_64):
libecpg6-32bit-10.5-lp150.3.3.1
libecpg6-32bit-debuginfo-10.5-lp150.3.3.1
libpq5-32bit-10.5-lp150.3.3.1
libpq5-32bit-debuginfo-10.5-lp150.3.3.1
- openSUSE Leap 15.0 (noarch):
postgresql10-docs-10.5-lp150.3.3.1
References:
https://www.suse.com/security/cve/CVE-2018-10915.html
https://www.suse.com/security/cve/CVE-2018-10925.html
https://www.suse.com/security/cve/CVE-2018-1115.html
https://bugzilla.suse.com/1091610
https://bugzilla.suse.com/1104199
https://bugzilla.suse.com/1104202
--
openSUSE-SU-2018:2600-1: important: Security update for ImageMagick
openSUSE Security Update: Security update for ImageMagick
______________________________________________________________________________
Announcement ID: openSUSE-SU-2018:2600-1
Rating: important
References: #1105592
Affected Products:
openSUSE Leap 15.0
______________________________________________________________________________
An update that contains security fixes can now be installed.
Description:
This update for ImageMagick fixes the following issues:
Security issue fixed:
- Disable PS, PS2, PS3, XPS and PDF coders in default policy.xml
(bsc#1105592)
This update was imported from the SUSE:SLE-15:Update update project.
Patch Instructions:
To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or "zypper patch".
Alternatively you can run the command listed for your product:
- openSUSE Leap 15.0:
zypper in -t patch openSUSE-2018-954=1
Package List:
- openSUSE Leap 15.0 (i586 x86_64):
ImageMagick-7.0.7.34-lp150.2.12.1
ImageMagick-debuginfo-7.0.7.34-lp150.2.12.1
ImageMagick-debugsource-7.0.7.34-lp150.2.12.1
ImageMagick-devel-7.0.7.34-lp150.2.12.1
ImageMagick-extra-7.0.7.34-lp150.2.12.1
ImageMagick-extra-debuginfo-7.0.7.34-lp150.2.12.1
libMagick++-7_Q16HDRI4-7.0.7.34-lp150.2.12.1
libMagick++-7_Q16HDRI4-debuginfo-7.0.7.34-lp150.2.12.1
libMagick++-devel-7.0.7.34-lp150.2.12.1
libMagickCore-7_Q16HDRI6-7.0.7.34-lp150.2.12.1
libMagickCore-7_Q16HDRI6-debuginfo-7.0.7.34-lp150.2.12.1
libMagickWand-7_Q16HDRI6-7.0.7.34-lp150.2.12.1
libMagickWand-7_Q16HDRI6-debuginfo-7.0.7.34-lp150.2.12.1
perl-PerlMagick-7.0.7.34-lp150.2.12.1
perl-PerlMagick-debuginfo-7.0.7.34-lp150.2.12.1
- openSUSE Leap 15.0 (x86_64):
ImageMagick-devel-32bit-7.0.7.34-lp150.2.12.1
libMagick++-7_Q16HDRI4-32bit-7.0.7.34-lp150.2.12.1
libMagick++-7_Q16HDRI4-32bit-debuginfo-7.0.7.34-lp150.2.12.1
libMagick++-devel-32bit-7.0.7.34-lp150.2.12.1
libMagickCore-7_Q16HDRI6-32bit-7.0.7.34-lp150.2.12.1
libMagickCore-7_Q16HDRI6-32bit-debuginfo-7.0.7.34-lp150.2.12.1
libMagickWand-7_Q16HDRI6-32bit-7.0.7.34-lp150.2.12.1
libMagickWand-7_Q16HDRI6-32bit-debuginfo-7.0.7.34-lp150.2.12.1
- openSUSE Leap 15.0 (noarch):
ImageMagick-doc-7.0.7.34-lp150.2.12.1
References:
https://bugzilla.suse.com/1105592
--
openSUSE-SU-2018:2601-1: important: Security update for spice-gtk
openSUSE Security Update: Security update for spice-gtk
______________________________________________________________________________
Announcement ID: openSUSE-SU-2018:2601-1
Rating: important
References: #1101295 #1104448
Cross-References: CVE-2018-10873 CVE-2018-10893
Affected Products:
openSUSE Leap 42.3
______________________________________________________________________________
An update that fixes two vulnerabilities is now available.
Description:
This update for spice-gtk fixes the following issues:
Security issues fixed:
- CVE-2018-10873: Fix potential heap corruption when demarshalling
(bsc#1104448)
- CVE-2018-10893: Avoid buffer overflow on image lz checks (bsc#1101295)
This update was imported from the SUSE:SLE-12-SP3:Update update project.
Patch Instructions:
To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or "zypper patch".
Alternatively you can run the command listed for your product:
- openSUSE Leap 42.3:
zypper in -t patch openSUSE-2018-958=1
Package List:
- openSUSE Leap 42.3 (noarch):
spice-gtk-lang-0.33-2.7.1
- openSUSE Leap 42.3 (x86_64):
libspice-client-glib-2_0-8-0.33-2.7.1
libspice-client-glib-2_0-8-debuginfo-0.33-2.7.1
libspice-client-glib-helper-0.33-2.7.1
libspice-client-glib-helper-debuginfo-0.33-2.7.1
libspice-client-gtk-3_0-5-0.33-2.7.1
libspice-client-gtk-3_0-5-debuginfo-0.33-2.7.1
libspice-controller0-0.33-2.7.1
libspice-controller0-debuginfo-0.33-2.7.1
spice-gtk-0.33-2.7.1
spice-gtk-debuginfo-0.33-2.7.1
spice-gtk-debugsource-0.33-2.7.1
spice-gtk-devel-0.33-2.7.1
typelib-1_0-SpiceClientGlib-2_0-0.33-2.7.1
typelib-1_0-SpiceClientGtk-3_0-0.33-2.7.1
References:
https://www.suse.com/security/cve/CVE-2018-10873.html
https://www.suse.com/security/cve/CVE-2018-10893.html
https://bugzilla.suse.com/1101295
https://bugzilla.suse.com/1104448
--
openSUSE-SU-2018:2602-1: important: Security update for spice
openSUSE Security Update: Security update for spice
______________________________________________________________________________
Announcement ID: openSUSE-SU-2018:2602-1
Rating: important
References: #1101295 #1104448
Cross-References: CVE-2018-10873 CVE-2018-10893
Affected Products:
openSUSE Leap 42.3
______________________________________________________________________________
An update that fixes two vulnerabilities is now available.
Description:
This update for spice fixes the following issues:
Security issues fixed:
- CVE-2018-10873: Fix potential heap corruption when demarshalling
(bsc#1104448)
- CVE-2018-10893: Avoid buffer overflow on image lz checks (bsc#1101295)
This update was imported from the SUSE:SLE-12-SP3:Update update project.
Patch Instructions:
To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or "zypper patch".
Alternatively you can run the command listed for your product:
- openSUSE Leap 42.3:
zypper in -t patch openSUSE-2018-957=1
Package List:
- openSUSE Leap 42.3 (x86_64):
libspice-server-devel-0.12.8-7.1
libspice-server1-0.12.8-7.1
libspice-server1-debuginfo-0.12.8-7.1
spice-debugsource-0.12.8-7.1
References:
https://www.suse.com/security/cve/CVE-2018-10873.html
https://www.suse.com/security/cve/CVE-2018-10893.html
https://bugzilla.suse.com/1101295
https://bugzilla.suse.com/1104448
--
