Reported by Anonymous

---

Linux version 2.6.21-ARCH (root@Wohnung) (gcc version 4.2.0) #1 SMP PREEMPT Mon Jun 11 23:47:51 CEST 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000e8000 size: 0000000000018000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000007feb0000 end: 000000007ffb0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000007ffb0000 size: 0000000000010000 end: 000000007ffc0000 type: 3
copy_e820_map() start: 000000007ffc0000 size: 0000000000030000 end: 000000007fff0000 type: 4
copy_e820_map() start: 000000007fff0000 size: 0000000000010000 end: 0000000080000000 type: 2
copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 524208) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 524208
early_node_map active PFN ranges
0: 0 -> 524208
On node 0 totalpages: 524208
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2303 pages used for memmap
HighMem zone: 292529 pages, LIFO batch:31
DMI present.
ACPI: RSDP 000F90C0, 0014 (r0 ACPIAM)
ACPI: RSDT 7FFB0000, 0030 (r1 A M I OEMRSDT 8000623 MSFT 97)
ACPI: FACP 7FFB0200, 0084 (r2 A M I OEMFACP 8000623 MSFT 97)
ACPI: DSDT 7FFB03F0, 407C (r1 M2N3V M2N3V136 136 INTL 2002026)
ACPI: FACS 7FFC0000, 0040
ACPI: APIC 7FFB0390, 005C (r1 A M I OEMAPIC 8000623 MSFT 97)
ACPI: OEMB 7FFC0040, 0056 (r1 A M I AMI_OEM 8000623 MSFT 97)
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id lapic_id enabled)
Processor #0 15:11 APIC version 16
ACPI: LAPIC (acpi_id lapic_id enabled)
Processor #1 15:11 APIC version 16
ACPI: IOAPIC (id address gsi_base)
IOAPIC: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:7f000000)
Built 1 zonelists. Total pages: 520113
Kernel command line: root=/dev/hda3 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2210.785 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2073764k/2096832k available (2315k kernel code, 21680k reserved, 761k data, 268k init, 1179328k highmem)
virtual kernel memory layout:
fixmap : 0xfff83000 - 0xfffff000 ( 496 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0407000 - 0xc044a000 ( 268 kB)
.data : 0xc0342ddd - 0xc040128c ( 761 kB)
.text : 0xc0100000 - 0xc0342ddd (2315 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4424.30 BogoMIPS (lpj=8848616)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4421.81 BogoMIPS (lpj=8843630)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
Total of 2 processors activated (8846.12 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 2 CPUs
migration_cost=4000
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table
ACPI: PCI Interrupt Routing Table
ACPI: PCI Interrupt Link (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link (IRQs 20 21 22) *10
ACPI: PCI Interrupt Link (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link (IRQs 22) *14
ACPI: Power Resource (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:09: iomem range 0xfee00000-0xfeefffff has been reserved
pnp: 00:09: iomem range 0xff380000-0xffffffff could not be reserved
pnp: 00:0c: ioport range 0x290-0x29f has been reserved
pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: fa900000-fe9fffff
PREFETCH window: d2800000-f27fffff
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: fea00000-feafffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
Time: acpi_pm clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 712k freed
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 268k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
libata version 2.20 loaded.
sata_nv 0000:00:0a.0: version 3.3
ACPI: PCI Interrupt Link enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0a.0 -> Link -> GSI 22 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ata1: SATA max UDMA/133 cmd 0x00010f80 ctl 0x00010f02 bmdma 0x0001e000 irq 16
ata2: SATA max UDMA/133 cmd 0x00010e80 ctl 0x00010e02 bmdma 0x0001e008 irq 16
scsi0 : sata_nv
ata1: SATA link down (SStatus 0 SControl 300)
scsi1 : sata_nv
ata2: SATA link down (SStatus 0 SControl 300)
NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
NFORCE3-250: chipset revision 162
NFORCE3-250: not 100% native mode: will probe irqs later
NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: MAXTOR STM3250820A, ATA DISK drive
hdb: WDC WD2000JB-00GVA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hdc: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdb: max request size: 512KiB
hdb: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (version 2.00.00)
powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xc
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xe
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x10
powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF)
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM)
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0 -> Link -> GSI 21 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 17, io mem 0xfebff000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
Linux agpgart interface v0.102 (c) Dave Jones
ACPI: PCI Interrupt Link enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1 -> Link -> GSI 20 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.1: irq 18, io mem 0xfebfe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: AGP aperture is 64M @ 0xf4000000
ACPI: PCI Interrupt Link enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.2 -> Link -> GSI 22 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: irq 16, io mem 0xfebfdc00
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: PCI Interrupt Link enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:05.0 -> Link -> GSI 21 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:05.0 to 64
input: PC Speaker as /class/input/input4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
eth0: forcedeth.c: subsystem: 01849:00df bound to 0000:00:05.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
PPP generic driver version 2.4.2
usb 3-1: new high speed USB device using ehci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt Link enabled at IRQ 19
ACPI: PCI Interrupt 0000:02:07.0 -> Link -> GSI 19 (level, low) -> IRQ 19
rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com\
NET: Registered protocol family 23
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 1-2: new full speed USB device using ohci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
NET: Registered protocol family 8
NET: Registered protocol family 20
usb 1-4: new low speed USB device using ohci_hcd and address 4
usb 1-4: configuration #1 chosen from 1 choice
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 2-4: new full speed USB device using ohci_hcd and address 2
usb 2-4: configuration #1 chosen from 1 choice
usb 1-2: reset full speed USB device using ohci_hcd and address 3
usbcore: registered new interface driver speedtch
usbcore: registered new interface driver hiddev
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input5
input: USB HID v1.10 Mouse on usb-0000:00:02.0-4
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
speedtch 1-2:1.0: found stage 1 firmware speedtch-1.bin
speedtch 1-2:1.0: found stage 2 firmware speedtch-2.bin
usbcore: registered new interface driver snd-usb-audio
eth0: no link during initialization.
rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel
rt2500 EEPROM: 7 7 7 7 7 7 7 7 7 7 7 7 7 7 dBm Maximum
scsi 2:0:0:0: Direct-Access Seagate External Drive PQ: 0 ANSI: 0
usb-storage: device scan complete
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 27 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 27 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 2:0:0:0: Attached scsi disk sda
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
ATM dev 0: ADSL line is synchronising
Clocksource tsc unstable (delta = -83628338 ns)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
Mobile IPv6
Adding 248996k swap on /dev/mapper/swap. Priority:-1 extents:1 across:248996k
tun0: Disabled Privacy Extensions
ra0: no IPv6 routers present
ATM dev 0: ADSL line is up (8128 kb/s down | 448 kb/s up)
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0 -> Link -> GSI 19 (level, low) -> IRQ 19
NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.11 Wed Jun 13 18:21:22 PDT 2007
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode

Reported by Anonymous

---

on debian etch kernel 2.6.16