Reported by Anonymous

---

Tested with a fresh install of the 32 bit DVD of Mandriva 2010 (4.3 Gb .iso download) on 26 Jan 2010. Initially it did not seem to work, but after running Drakconf a couple of times and after 2-3 systems restarts, I noticed it had been found (probably by harddrake at some point) and some form of drivers installed ok (no wired connection present).
WPA2 working fine.
Using EasyURPMI website, I configured 'automatically' the updates in the Software manager, and 30 mins later had downloaded all 379 Mandriva updates ok.
I tentatively plugged my WG111v3 adapter into a Mandriva 2009 install on another PC. Again, after a couple of reboots (not sure why it really needs 2-3 reboots, must be a harddrake issue!), it finally recognised the adapter and after an hour or so I had completely updated 2009.0 to 2010.0, plus all 2010.0 updates.

The connection is stable and I haven't detected any dropouts or disconnects.

In fact, I am so surprised it all seems to work I am trying to source a couple more WG111v3's, but they seem a little hard to come by now.

Reported by Anonymous

---

Does not work. ndiswrapper uses the XP drivers, that means this piece of hardware cannot be claimed to be compatible with Linux.

Reported by namandar

---

Hello,

i have tested the drivers. it faild. i get 'driver present' but no 'hardware present' ....
output of lspci:
11ab:1faa (rev 03) --0000:01:07.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335 802.11b/g Wireless (rev 03)

output of /var/log/messages:

Sep 25 12:42:39 fr34k kernel: ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
Sep 25 12:42:39 fr34k kernel: wlan: 0.8.6.0 (EXPERIMENTAL)
Sep 25 12:42:39 fr34k kernel: ath_rate_sample: 1.2
Sep 25 12:42:39 fr34k kernel: ath_pci: 0.9.6.0 (EXPERIMENTAL)
Sep 25 12:47:46 fr34k kernel: ath_pci: driver unloaded
Sep 25 12:47:57 fr34k kernel: ath_rate_sample: unloaded
Sep 25 12:48:04 fr34k kernel: wlan: driver unloaded
Sep 25 12:48:12 fr34k kernel: ath_hal: driver unloaded
Sep 25 12:52:00 fr34k kernel: ndiswrapper version 1.3rc1 loaded (preempt=no,smp=no)

tryed some others yesterday:

Sep 24 17:05:34 fr34k kernel: ndiswrapper version 1.3rc1 loaded (preempt=no,smp=no)
Sep 24 17:05:34 fr34k kernel: ndiswrapper: driver mrv8000c (Marvell,09/17/2004,3.1.0.19) loaded
Sep 24 17:05:34 fr34k kernel: Trying to free nonexistent resource <ec000000-ec00ffff>
Sep 24 17:05:34 fr34k kernel: Trying to free nonexistent resource <ec010000-ec01ffff>
---
Sep 24 17:05:34 fr34k kernel: ACPI: PCI interrupt for device 0000:01:07.0 disabled
Sep 24 17:18:42 fr34k kernel: ndiswrapper version 1.3rc1 loaded (preempt=no,smp=no)
Sep 24 17:18:42 fr34k kernel: ndiswrapper: driver wg311v3 (NETGEAR,02/22/2005,3.1.1.7) loaded
Sep 24 17:18:42 fr34k kernel: Trying to free nonexistent resource <ec000000-ec00ffff>
Sep 24 17:18:42 fr34k kernel: Trying to free nonexistent resource <ec010000-ec01ffff>
Sep 24 17:18:42 fr34k kernel: ACPI: PCI interrupt for device 0000:01:07.0 disabled
---
Sep 25 12:42:39 fr34k kernel: ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
Sep 25 12:42:39 fr34k kernel: wlan: 0.8.6.0 (EXPERIMENTAL)
Sep 25 12:42:39 fr34k kernel: ath_rate_sample: 1.2
Sep 25 12:42:39 fr34k kernel: ath_pci: 0.9.6.0 (EXPERIMENTAL)

please, let me know if you have running this card, and how you did it ...


thx
Namandar

Reported by ravana

---

Works with ndiswrapper using CB-55/MB-55 drivers downloaded from the Marvell semiconductor website ( http://www.marvell.com/drivers)