Fedora install problem
On Dell dimension 8300 : P4 2. 8c Mhz 1024 Mo RAM dual channel bus 400Mhz Firewire ati radeon 9800 1 pionner a05 dvd-rw writer IDE 1 samung dvd (cd writer) IDE IBM IDE disk Maxtor IDE disk SATA controlleur off in bios hypertrheading enable So.
On Dell dimension 8300 :
P4 2.8c Mhz
1024 Mo RAM dual channel bus 400Mhz
Firewire
ati radeon 9800
1 pionner a05 dvd-rw writer IDE
1 samung dvd (cd writer) IDE
IBM IDE disk
Maxtor IDE disk
SATA controlleur off in bios
hypertrheading enable
So ...
1) install fedora first time ... all is ok, rpms has been installed and system ask me to reboot
2) system reboot and start fedora starting screen who probbing my hardware (screen with white computer)
3) i click on details to see what system do .. and it freeze after firewire was ohci is started ...
4) i've try many times the install process whith diferent option (consult some post on bugzilla) (allowcddma, acpi=no etc ..) but not resolved ...
note : i've try to disable hypertreading .. start on smp .. none smp kernel but nothing change too ...
Thanks in advance for your help.
P4 2.8c Mhz
1024 Mo RAM dual channel bus 400Mhz
Firewire
ati radeon 9800
1 pionner a05 dvd-rw writer IDE
1 samung dvd (cd writer) IDE
IBM IDE disk
Maxtor IDE disk
SATA controlleur off in bios
hypertrheading enable
So ...
1) install fedora first time ... all is ok, rpms has been installed and system ask me to reboot
2) system reboot and start fedora starting screen who probbing my hardware (screen with white computer)
3) i click on details to see what system do .. and it freeze after firewire was ohci is started ...
4) i've try many times the install process whith diferent option (consult some post on bugzilla) (allowcddma, acpi=no etc ..) but not resolved ...
note : i've try to disable hypertreading .. start on smp .. none smp kernel but nothing change too ...
Thanks in advance for your help.
Participate on our website and join the conversation
This topic is archived. New comments cannot be posted and votes cannot be cast.
Responses to this topic
problem has been resolve by myself .. after reboot to rescue mode and change init level 5 to 3
After that i will be able to setup the last ati radeon 9800 drivers ... and now x works great.
Now i've another problems :
from dmesg :
Unsupported Intel chipset (device id: 2578), you might want to try agp_try_unsupported=1.
and
usb.c: registered new driver audio
usbaudio: device 2 audiocontrol interface 0 has 1 input and 1 output AudioStreaming interfaces
usbaudio: device 2 interface 2 altsetting 1 channels 1 framesize 1 configured
usbaudio: valid input sample rate 6400
usbaudio: valid input sample rate 48000
usbaudio: device 2 interface 2 altsetting 1: format 0x00000040 sratelo 6400 sratehi 48000 attributes 0x01
usbaudio: device 2 interface 2 altsetting 2 channels 1 framesize 2 configured
usbaudio: valid input sample rate 6400
usbaudio: valid input sample rate 48000
usbaudio: device 2 interface 2 altsetting 2: format 0x00000010 sratelo 6400 sratehi 48000 attributes 0x01
usbaudio: device 2 interface 1 altsetting 0 does not have an endpoint
usbaudio: device 2 interface 1 altsetting 1 channels 1 framesize 2 configured
usbaudio: valid output sample rate 6400
usbaudio: valid output sample rate 48000
usbaudio: device 2 interface 1 altsetting 1: format 0x00000010 sratelo 6400 sratehi 48000 attributes 0x01
usbaudio: device 2 interface 1 altsetting 2 channels 2 framesize 2 configured
usbaudio: valid output sample rate 6400
usbaudio: valid output sample rate 48000
usbaudio: device 2 interface 1 altsetting 2: format 0x01000010 sratelo 6400 sratehi 48000 attributes 0x01
usbaudio: registered dsp 14,3
usbaudio: constructing mixer for Terminal 20 type 0x0301
usbaudio: registered mixer 14,0
usbaudio: constructing mixer for Terminal 13 type 0x0101
usbaudio: registered mixer 14,16
usb_audio_parsecontrol: usb_audio_state at f73c7200
audio.c: v1.0.0:USB Audio Class driver
usb.c: registered new driver dabusb
dabusb.c: v1.54:DAB-USB Interface Driver for Linux
1999
usb-uhci.c: interrupt, status 2, frame# 1371
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 218 ret -84
usb.c: USB disconnect on device 00:1d.2-2 address 3
hub.c: new USB device 00:1d.2-2, assigned address 4
usbaudio: device 4 audiocontrol interface 0 has 1 input and 0 output AudioStreaming interfaces
usbaudio: device 4 interface 1 altsetting 1 channels 2 framesize 2 configured
usbaudio: valid input sample rate 48000
usbaudio: device 4 interface 1 altsetting 1: format 0x01000010 sratelo 48000 sratehi 48000 attributes 0x00
usbaudio: registered dsp 14,19
usbaudio: constructing mixer for Terminal 2 type 0x0101
usbaudio: no mixer controls found for Terminal 2
usbaudio: constructing mixer for Terminal 4 type 0x0302
usbaudio: registered mixer 14,32
usbaudio: constructing mixer for Terminal 5 type 0x0603
usbaudio: no mixer controls found for Terminal 5
usb_audio_parsecontrol: usb_audio_state at f73c7400
and it seems that modprob use 50% CPU ...
What can i do to resolve ????
;(
thanks in advance for your help.
After that i will be able to setup the last ati radeon 9800 drivers ... and now x works great.
Now i've another problems :
from dmesg :
Unsupported Intel chipset (device id: 2578), you might want to try agp_try_unsupported=1.
and
usb.c: registered new driver audio
usbaudio: device 2 audiocontrol interface 0 has 1 input and 1 output AudioStreaming interfaces
usbaudio: device 2 interface 2 altsetting 1 channels 1 framesize 1 configured
usbaudio: valid input sample rate 6400
usbaudio: valid input sample rate 48000
usbaudio: device 2 interface 2 altsetting 1: format 0x00000040 sratelo 6400 sratehi 48000 attributes 0x01
usbaudio: device 2 interface 2 altsetting 2 channels 1 framesize 2 configured
usbaudio: valid input sample rate 6400
usbaudio: valid input sample rate 48000
usbaudio: device 2 interface 2 altsetting 2: format 0x00000010 sratelo 6400 sratehi 48000 attributes 0x01
usbaudio: device 2 interface 1 altsetting 0 does not have an endpoint
usbaudio: device 2 interface 1 altsetting 1 channels 1 framesize 2 configured
usbaudio: valid output sample rate 6400
usbaudio: valid output sample rate 48000
usbaudio: device 2 interface 1 altsetting 1: format 0x00000010 sratelo 6400 sratehi 48000 attributes 0x01
usbaudio: device 2 interface 1 altsetting 2 channels 2 framesize 2 configured
usbaudio: valid output sample rate 6400
usbaudio: valid output sample rate 48000
usbaudio: device 2 interface 1 altsetting 2: format 0x01000010 sratelo 6400 sratehi 48000 attributes 0x01
usbaudio: registered dsp 14,3
usbaudio: constructing mixer for Terminal 20 type 0x0301
usbaudio: registered mixer 14,0
usbaudio: constructing mixer for Terminal 13 type 0x0101
usbaudio: registered mixer 14,16
usb_audio_parsecontrol: usb_audio_state at f73c7200
audio.c: v1.0.0:USB Audio Class driver
usb.c: registered new driver dabusb
dabusb.c: v1.54:DAB-USB Interface Driver for Linux
1999usb-uhci.c: interrupt, status 2, frame# 1371
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 218 ret -84
usb.c: USB disconnect on device 00:1d.2-2 address 3
hub.c: new USB device 00:1d.2-2, assigned address 4
usbaudio: device 4 audiocontrol interface 0 has 1 input and 0 output AudioStreaming interfaces
usbaudio: device 4 interface 1 altsetting 1 channels 2 framesize 2 configured
usbaudio: valid input sample rate 48000
usbaudio: device 4 interface 1 altsetting 1: format 0x01000010 sratelo 48000 sratehi 48000 attributes 0x00
usbaudio: registered dsp 14,19
usbaudio: constructing mixer for Terminal 2 type 0x0101
usbaudio: no mixer controls found for Terminal 2
usbaudio: constructing mixer for Terminal 4 type 0x0302
usbaudio: registered mixer 14,32
usbaudio: constructing mixer for Terminal 5 type 0x0603
usbaudio: no mixer controls found for Terminal 5
usb_audio_parsecontrol: usb_audio_state at f73c7400
and it seems that modprob use 50% CPU ...
What can i do to resolve ????
;(
thanks in advance for your help.
