netgear WG311T as AP??
how do i set up my netgear WG311T (atheros chipset) as an AP?? iwconfig essid mylan will make any machine become part of mylan but how do i make an accesspoint with the essid mylan any command??? i have done the following to get my card working 2)Go to ATrpm ( ) in Firefox 1.
how do i set up my netgear WG311T (atheros chipset) as an AP??
iwconfig essid "mylan"
will make any machine become part of "mylan"
but how do i make an accesspoint with the essid "mylan"
any command???
i have done the following to get my card working
2)Go to ATrpm ( http://atrpms.net/dist/fc4/madwifi/) in Firefox 1.07 (or later) and download madwifi-0.9.6.0-18.rhfc4.at.i386.rpm by clicking on the link (I'm not running a 64bit processor). When this is run in the Firefox download manager you get the option to "open with" and in the drop down box "install packages (default)". Hit OK. This will install this rpm. Do this before you proceed to the next step.
3) Now search the ATrpm Fedora driver list ( http://atrpms.net/dist/fc4/madwifi/) and make sure you get the correct rpm to match your kernel details you wrote down in Step 1) above. In my case "uname -a" told me that my kernal is 2.6.14-1.1644_FC4. I do not have a 64bit processor running so I selected this rpm: madwifi-kmdl-2.6.14-1.1644_FC4-0.9.6.0-18.rhfc4.at.i686.rpm. Make sure you click on the "madwifi-kmdl-" rpm that matches both your your processor and kernel.
4) Click on the correct rpm as described in 3) above and Firefox will offer to install it. Click OK.
5) Reboot your computer.
6) Go to Desktop in your FC4 top panel. Select "System settings" then "Network". Type in your root password when asked and you will be taken to graphic menu that will list your network cards. In my case my laptop has an ethernet card and the wireless card. Until I installed Madwifi as described above the wireless card was not listed.
7) The wireless card is now listed under "Devices", in my case under the ethernet card. Check the box to the left next of the wireless card and press the "Activate" button.
8) When you go to leave the network menu you will be asked to save the new settings. Press OK. You're almost there.
9) Your card will still not be working. Restart your computer.
10) Bingo! It works.
so my card is working just fine.....what procedure or command to set it up as an AP???
__________________
iwconfig essid "mylan"
will make any machine become part of "mylan"
but how do i make an accesspoint with the essid "mylan"
any command???
i have done the following to get my card working
2)Go to ATrpm ( http://atrpms.net/dist/fc4/madwifi/) in Firefox 1.07 (or later) and download madwifi-0.9.6.0-18.rhfc4.at.i386.rpm by clicking on the link (I'm not running a 64bit processor). When this is run in the Firefox download manager you get the option to "open with" and in the drop down box "install packages (default)". Hit OK. This will install this rpm. Do this before you proceed to the next step.
3) Now search the ATrpm Fedora driver list ( http://atrpms.net/dist/fc4/madwifi/) and make sure you get the correct rpm to match your kernel details you wrote down in Step 1) above. In my case "uname -a" told me that my kernal is 2.6.14-1.1644_FC4. I do not have a 64bit processor running so I selected this rpm: madwifi-kmdl-2.6.14-1.1644_FC4-0.9.6.0-18.rhfc4.at.i686.rpm. Make sure you click on the "madwifi-kmdl-" rpm that matches both your your processor and kernel.
4) Click on the correct rpm as described in 3) above and Firefox will offer to install it. Click OK.
5) Reboot your computer.
6) Go to Desktop in your FC4 top panel. Select "System settings" then "Network". Type in your root password when asked and you will be taken to graphic menu that will list your network cards. In my case my laptop has an ethernet card and the wireless card. Until I installed Madwifi as described above the wireless card was not listed.
7) The wireless card is now listed under "Devices", in my case under the ethernet card. Check the box to the left next of the wireless card and press the "Activate" button.
8) When you go to leave the network menu you will be asked to save the new settings. Press OK. You're almost there.
9) Your card will still not be working. Restart your computer.
10) Bingo! It works.
so my card is working just fine.....what procedure or command to set it up as an AP???
__________________
Participate on our website and join the conversation
This topic is archived. New comments cannot be posted and votes cannot be cast.
