The following updates has been released for openSUSE Leap:
openSUSE-SU-2018:2178-1: moderate: Security update for libgcrypt
openSUSE-SU-2018:2180-1: moderate: Security update for bouncycastle
openSUSE-SU-2018:2184-1: moderate: Security update for wireshark
openSUSE-SU-2018:2188-1: moderate: Security update for wireshark
openSUSE-SU-2018:2178-1: moderate: Security update for libgcrypt
openSUSE-SU-2018:2180-1: moderate: Security update for bouncycastle
openSUSE-SU-2018:2184-1: moderate: Security update for wireshark
openSUSE-SU-2018:2188-1: moderate: Security update for wireshark
openSUSE-SU-2018:2178-1: moderate: Security update for libgcrypt
openSUSE Security Update: Security update for libgcrypt
______________________________________________________________________________
Announcement ID: openSUSE-SU-2018:2178-1
Rating: moderate
References: #1064455 #1090766 #1097410
Cross-References: CVE-2018-0495
Affected Products:
openSUSE Leap 42.3
______________________________________________________________________________
An update that solves one vulnerability and has two fixes
is now available.
Description:
This update for libgcrypt fixes the following issues:
The following security vulnerability was addressed:
- CVE-2018-0495: Mitigate a novel side-channel attack by enabling blinding
for ECDSA signatures (bsc#1097410).
The following other issues were fixed:
- Extended the fipsdrv dsa-sign and dsa-verify commands with the
--algo parameter for the FIPS testing of DSA SigVer and SigGen
(bsc#1064455).
- Ensure libgcrypt20-hmac and libgcrypt20 are installed in the correct
order. (bsc#1090766)
This update was imported from the SUSE:SLE-12:Update update project.
Patch Instructions:
To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or "zypper patch".
Alternatively you can run the command listed for your product:
- openSUSE Leap 42.3:
zypper in -t patch openSUSE-2018-795=1
Package List:
- openSUSE Leap 42.3 (i586 x86_64):
libgcrypt-cavs-1.6.1-45.1
libgcrypt-cavs-debuginfo-1.6.1-45.1
libgcrypt-debugsource-1.6.1-45.1
libgcrypt-devel-1.6.1-45.1
libgcrypt-devel-debuginfo-1.6.1-45.1
libgcrypt20-1.6.1-45.1
libgcrypt20-debuginfo-1.6.1-45.1
libgcrypt20-hmac-1.6.1-45.1
- openSUSE Leap 42.3 (x86_64):
libgcrypt-devel-32bit-1.6.1-45.1
libgcrypt-devel-debuginfo-32bit-1.6.1-45.1
libgcrypt20-32bit-1.6.1-45.1
libgcrypt20-debuginfo-32bit-1.6.1-45.1
libgcrypt20-hmac-32bit-1.6.1-45.1
References:
https://www.suse.com/security/cve/CVE-2018-0495.html
https://bugzilla.suse.com/1064455
https://bugzilla.suse.com/1090766
https://bugzilla.suse.com/1097410
--
openSUSE-SU-2018:2180-1: moderate: Security update for bouncycastle
openSUSE Security Update: Security update for bouncycastle
______________________________________________________________________________
Announcement ID: openSUSE-SU-2018:2180-1
Rating: moderate
References: #1100694
Cross-References: CVE-2018-1000613
Affected Products:
openSUSE Leap 42.3
______________________________________________________________________________
An update that fixes one vulnerability is now available.
Description:
This update for bouncycastle fixes the following issues:
Security issue fixed:
- CVE-2018-1000613: Fix use of Externally-Controlled Input to Select
Classes or Code ('Unsafe Reflection') (boo#1100694).
Patch Instructions:
To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or "zypper patch".
Alternatively you can run the command listed for your product:
- openSUSE Leap 42.3:
zypper in -t patch openSUSE-2018-794=1
Package List:
- openSUSE Leap 42.3 (noarch):
bouncycastle-1.60-23.7.1
bouncycastle-javadoc-1.60-23.7.1
References:
https://www.suse.com/security/cve/CVE-2018-1000613.html
https://bugzilla.suse.com/1100694
--
openSUSE-SU-2018:2184-1: moderate: Security update for wireshark
openSUSE Security Update: Security update for wireshark
______________________________________________________________________________
Announcement ID: openSUSE-SU-2018:2184-1
Rating: moderate
References: #1101776 #1101777 #1101786 #1101788 #1101791
#1101794 #1101800 #1101802 #1101804 #1101810
Cross-References: CVE-2018-14339 CVE-2018-14340 CVE-2018-14341
CVE-2018-14342 CVE-2018-14343 CVE-2018-14344
CVE-2018-14367 CVE-2018-14368 CVE-2018-14369
CVE-2018-14370
Affected Products:
openSUSE Leap 15.0
______________________________________________________________________________
An update that fixes 10 vulnerabilities is now available.
Description:
This update for wireshark fixes the following issues:
Security issues fixed:
- CVE-2018-14342: BGP dissector large loop (wnpa-sec-2018-34, boo#1101777)
- CVE-2018-14344: ISMP dissector crash (wnpa-sec-2018-35, boo#1101788)
- CVE-2018-14340: Multiple dissectors could crash (wnpa-sec-2018-36,
boo#1101804)
- CVE-2018-14343: ASN.1 BER dissector crash (wnpa-sec-2018-37, boo#1101786)
- CVE-2018-14339: MMSE dissector infinite loop (wnpa-sec-2018-38,
boo#1101810)
- CVE-2018-14341: DICOM dissector crash (wnpa-sec-2018-39, boo#1101776)
- CVE-2018-14368: Bazaar dissector infinite loop (wnpa-sec-2018-40,
boo#1101794)
- CVE-2018-14369: HTTP2 dissector crash (wnpa-sec-2018-41, boo#1101800)
- CVE-2018-14367: CoAP dissector crash (wnpa-sec-2018-42, boo#1101791)
- CVE-2018-14370: IEEE 802.11 dissector crash (wnpa-sec-2018-43,
boo#1101802)
Bug fixes:
- Further bug fixes and updated protocol support as listed in:
https://www.wireshark.org/docs/relnotes/wireshark-2.4.8.html
Patch Instructions:
To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or "zypper patch".
Alternatively you can run the command listed for your product:
- openSUSE Leap 15.0:
zypper in -t patch openSUSE-2018-793=1
Package List:
- openSUSE Leap 15.0 (i586 x86_64):
libwireshark9-2.4.8-lp150.2.6.1
libwireshark9-debuginfo-2.4.8-lp150.2.6.1
libwiretap7-2.4.8-lp150.2.6.1
libwiretap7-debuginfo-2.4.8-lp150.2.6.1
libwscodecs1-2.4.8-lp150.2.6.1
libwscodecs1-debuginfo-2.4.8-lp150.2.6.1
libwsutil8-2.4.8-lp150.2.6.1
libwsutil8-debuginfo-2.4.8-lp150.2.6.1
wireshark-2.4.8-lp150.2.6.1
wireshark-debuginfo-2.4.8-lp150.2.6.1
wireshark-debugsource-2.4.8-lp150.2.6.1
wireshark-devel-2.4.8-lp150.2.6.1
wireshark-ui-qt-2.4.8-lp150.2.6.1
wireshark-ui-qt-debuginfo-2.4.8-lp150.2.6.1
References:
https://www.suse.com/security/cve/CVE-2018-14339.html
https://www.suse.com/security/cve/CVE-2018-14340.html
https://www.suse.com/security/cve/CVE-2018-14341.html
https://www.suse.com/security/cve/CVE-2018-14342.html
https://www.suse.com/security/cve/CVE-2018-14343.html
https://www.suse.com/security/cve/CVE-2018-14344.html
https://www.suse.com/security/cve/CVE-2018-14367.html
https://www.suse.com/security/cve/CVE-2018-14368.html
https://www.suse.com/security/cve/CVE-2018-14369.html
https://www.suse.com/security/cve/CVE-2018-14370.html
https://bugzilla.suse.com/1101776
https://bugzilla.suse.com/1101777
https://bugzilla.suse.com/1101786
https://bugzilla.suse.com/1101788
https://bugzilla.suse.com/1101791
https://bugzilla.suse.com/1101794
https://bugzilla.suse.com/1101800
https://bugzilla.suse.com/1101802
https://bugzilla.suse.com/1101804
https://bugzilla.suse.com/1101810
--
openSUSE-SU-2018:2188-1: moderate: Security update for wireshark
openSUSE Security Update: Security update for wireshark
______________________________________________________________________________
Announcement ID: openSUSE-SU-2018:2188-1
Rating: moderate
References: #1082692 #1101776 #1101777 #1101786 #1101788
#1101794 #1101800 #1101804 #1101810
Cross-References: CVE-2018-14339 CVE-2018-14340 CVE-2018-14341
CVE-2018-14342 CVE-2018-14343 CVE-2018-14344
CVE-2018-14368 CVE-2018-14369 CVE-2018-7325
Affected Products:
openSUSE Leap 42.3
______________________________________________________________________________
An update that fixes 9 vulnerabilities is now available.
Description:
This update for wireshark fixes the following issues:
Security issues fixed:
- CVE-2018-7325: RPKI-Router infinite loop (boo#1082692)
- CVE-2018-14342: BGP dissector large loop (wnpa-sec-2018-34, boo#1101777)
- CVE-2018-14344: ISMP dissector crash (wnpa-sec-2018-35, boo#1101788)
- CVE-2018-14340: Multiple dissectors could crash (wnpa-sec-2018-36,
boo#1101804)
- CVE-2018-14343: ASN.1 BER dissector crash (wnpa-sec-2018-37, boo#1101786)
- CVE-2018-14339: MMSE dissector infinite loop (wnpa-sec-2018-38,
boo#1101810)
- CVE-2018-14341: DICOM dissector crash (wnpa-sec-2018-39, boo#1101776)
- CVE-2018-14368: Bazaar dissector infinite loop (wnpa-sec-2018-40,
boo#1101794)
- CVE-2018-14369: HTTP2 dissector crash (wnpa-sec-2018-41, boo#1101800)
Bug fixes:
- Further bug fixes and updated protocol support as listed in:
https://www.wireshark.org/docs/relnotes/wireshark-2.2.16.html
Patch Instructions:
To install this openSUSE Security Update use the SUSE recommended installation methods
like YaST online_update or "zypper patch".
Alternatively you can run the command listed for your product:
- openSUSE Leap 42.3:
zypper in -t patch openSUSE-2018-792=1
Package List:
- openSUSE Leap 42.3 (x86_64):
wireshark-2.2.16-44.1
wireshark-debuginfo-2.2.16-44.1
wireshark-debugsource-2.2.16-44.1
wireshark-devel-2.2.16-44.1
wireshark-ui-gtk-2.2.16-44.1
wireshark-ui-gtk-debuginfo-2.2.16-44.1
wireshark-ui-qt-2.2.16-44.1
wireshark-ui-qt-debuginfo-2.2.16-44.1
References:
https://www.suse.com/security/cve/CVE-2018-14339.html
https://www.suse.com/security/cve/CVE-2018-14340.html
https://www.suse.com/security/cve/CVE-2018-14341.html
https://www.suse.com/security/cve/CVE-2018-14342.html
https://www.suse.com/security/cve/CVE-2018-14343.html
https://www.suse.com/security/cve/CVE-2018-14344.html
https://www.suse.com/security/cve/CVE-2018-14368.html
https://www.suse.com/security/cve/CVE-2018-14369.html
https://www.suse.com/security/cve/CVE-2018-7325.html
https://bugzilla.suse.com/1082692
https://bugzilla.suse.com/1101776
https://bugzilla.suse.com/1101777
https://bugzilla.suse.com/1101786
https://bugzilla.suse.com/1101788
https://bugzilla.suse.com/1101794
https://bugzilla.suse.com/1101800
https://bugzilla.suse.com/1101804
https://bugzilla.suse.com/1101810
--
